Clean the Oil Before Changing It.
Mobile, off-line, and by-pass filtration solutions aimed at reducing particle, water, and process-induced contamination in industrial oil and fuel systems.
Filtration is not just changing a filter.
The right solution is selected based on oil type, viscosity, tank volume, contamination level, water amount, target cleanliness class, and the operating conditions of the system. OEMLUBE handles the on-site application together with equipment selection, connection plan, filtration cycle, and sample verification.
- Particle control: Removal of fine contaminants from the system.
- Water control: Water separation / dehydration options depending on the application.
- New oil cleaning: Filtering the oil before it enters the tank.
- Oil recovery: Cleaning and preparing suitable oil for reuse based on analysis results.
Not the same filter for every system, but the right process.
You can review the application details by selecting the most suitable filtration solution for the needs of your facility and equipment below.
Turbine Oil Filtration
Off-line / by-pass filtration and conditioning service aimed at the controlled reduction of particles, water, and process-borne contaminants in turbine oil.
View details →
Plastic Injection & Hydraulic Oil Filtration
Mobile/off-line filtration service for particle and water control in hydraulic systems containing sensitive servo valves, pumps, and proportional control elements.
View details →
Fuel & Diesel Filtration
Transfer, tank circulation, and polishing type filtration solutions to reduce particles and free water in stored diesel and process fuels.
View details →
Gearbox, Gear & Circulation Oil Filtration
Filtration for the control of wear particles and water contamination in high-volume gearboxes, gear units, and central circulation systems.
View details →
Compressor Oil Filtration
By-pass/off-line filtration applications supporting fine particle and water control in compressor lubrication systems.
View details →
Mobile Equipment & Engine Oil Filtration
By-pass and service-type filtration solutions supporting oil cleanliness in diesel engines and mobile hydraulic systems.
View details →
Cutting & Process Oil Filtration
Filtration applications aimed at more stable oil usage by reducing swarf, metal particles, and process contaminants in neat cutting and process oils.
View details →
Flushing, New Oil & Transfer Filtration
Controlled and filtered transfer of new oil into the system, post-maintenance line/tank flushing support, and pre-oil change conditioning service.
View details →Filtration service in 4 steps
Survey & Sampling
Oil type, tank volume, operating conditions, and current contamination are evaluated.
Equipment Selection
Flow rate, filter micron rating, water separation, and site safety needs are determined.
On-site Filtration
Oil is circulated and cleaned in a controlled manner via a closed-loop connection.
Verification
Post-process cleanliness level and oil condition are checked with a final sample.
Send the tank volume and the oil used, and we will create a suitable filtration plan.
For a quote: equipment type + oil brand/viscosity + tank volume + latest oil analysis report if possible.