Commissioning • Maintenance • Oil Change • Filling
Flushing, New Oil & Transfer Filtration
Controlled and filtered transfer of new oil into the system, post-maintenance line/tank flushing support, and pre-oil change conditioning service.
Typical Risks
What do we encounter in the system?
- Off-target particles in new oil
- Dirty hoses and transfer equipment
- Post-maintenance pipe/line contamination
- Tank bottom sludge
- Cleanliness targets during commissioning
OEMLUBE Approach
How do we work?
- Closed-loop filtered transfer
- New oil pre-filtration
- Flushing skids
- Temporary filtration loop
- Verification against target cleanliness code
Application Principle
The filtration unit is selected according to the system.
Filter micron rating alone is not a sufficient selection criterion. Oil viscosity, temperature, existing pump/valve structure, tank volume, desired circulation time, water load, and target cleanliness value must be evaluated together.
Analysis
Oil and contamination status are determined.
Connection
Suction-return points and safe on-site connections are planned.
Filtration
Oil is cleaned off-line with a controlled flow rate.
Control
The result is confirmed with a final sample and on-site observation.
Information Required for a Quote
Oil type + tank volume + equipment + analysis report
Sharing these four pieces of information accelerates the determination of the correct device/flow rate and operation time.